Esd Mat

Product Details:

Product Details:

 ESD MAT – PVC/Rubber  2/3Layer  THICKNESS – 1.5mm/2mm An ESD (electrostatic discharge) mat, typically made of vinyl or rubber, protects equipment and spaces by dissipating electrical discharges before they can cause damage. An ESD mat slows the flow of static charges, neutralizing static electricity and moving it away from electronic equipment or the surface of ESD sensitive devices. 

Additional Information:

• Production Capacity: 200roll
• Delivery Time: 1day
• Packaging Details: roll

Product Details:

 ESD MAT – PVC/Rubber  2/3Layer  THICKNESS – 1.5mm/2mm An ESD (electrostatic discharge) mat, typically made of vinyl or rubber, protects equipment and spaces by dissipating electrical discharges before they can cause damage. An ESD mat slows the flow of static charges, neutralizing static electricity and moving it away from electronic equipment or the surface of ESD sensitive devices. Other information:  Resistivity of surface layer: 1MΩ-1000MΩ  Resistivity of bottom layer: 1kΩ-100kΩ  Rattler loss: < 0.02g/cm2  Time for static dissipation: < 0.5S  Colours – Blue/Green/Grey  Antistatic or ESD Mats have a high electrical resistance, which allows the electrostatic discharge to “flow” across the surface of the mat at a slow rate – enough to get the ESD away from your electronics, while at the same time neutralizing what little charge inevitably does build up. An ESD mat – also called an antistatic mat – is a covering that shields an individual or apiece of equipment from static electricity discharge

Product Details:

We are engaged in offering a wide range of products to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

Our enterprise has been involved in manufacturing a wide range of construction products such as ESD Safe Rubber Mat. This is double layered high temperature Resistant mat that is ideal for Static Safe Work Benches. The material has high resistance to solder and chemicals, when contacted. High quality dissipative mat are designed to harmlessly

Additional Information:

• Production Capacity: 100
• Delivery Time: within week
• Packaging Details: Introduction The purpose of an ESD worksurface is to aid in the prevention of damage to ESD sensitive components and assemblies from electrostatic discharge. An ESD worksurface provides protection in the following two ways: 1. Providing an antistatic worksurface area that will limit static electricity generation. 2. Removing the charge from a conductive object placed on the worksurface. A dissipative worksurface having a surface resistance of at least 1 x 106, but less than 1 x 109 ohms is recommended by worksurface standard ANSI/ESD S4.1. Dissipative materials minimize the generation of static charges, and will dissipate a charge slow enough so that a spark will not occur. Dissipative materials are usually the preferred choice for bench top worksurfaces. Conductive materials are the quickest to remove a charge, but they can also cause damage by discharging too rapidly. Conductive materials are usually used as floor mats, which is defined by ANSI/ESD S7.1 as less than 1 x 106 ohms. General Grounding Guidelines 1. ANSI/ESD S20.20 requires that all conductors in an ESD protected area, including personnel, must be grounded. 2. The ESD ground must be tied directly to and at the same potential as the building or ¿¿¿green wire¿¿¿ equipment ground. 3. Per ANSI/ESD S20.20, the ESD control program can in no way replace or supercede any requirements for personnel safety. Ground fault circuit interrupters (GFCI) and other safety protection should be considered wherever personnel might come into contact with electrical sources. 4. All electrical outlets should be verified for proper wiring configuration, resistance or impedance and GFCI function when the mat is installed and periodically thereafter.

Product Details:

We are engaged in offering a wide range of products to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

We are engaged in offering a wide range of products to our clients. Our range of all products is widely appreciated by our clients.